5636-Media Storage Bottle
•Borosilicate glass
•Used for mixing and storing culture media
•Large opening, special lip and sloping shoulders facilitate pouring and cleaning
•Heavier walls prevent breakage
•Smaller diameter at base conserves space in sterilizer and freezer
•With marking area and approximate graduations
•Supplied with nontoxic rubber lined screw cap
| Stock No. | Size(ml) | Cap Size(mm) | O.D.(mm) | Height(mm) | Case Qty. |
| 5636-00125 | 125 | 33 | 55 | 120 | 12 |
| 5636-00250 | 250 | 33 | 66 | 149 | 12 |
| 5636-00533 | 500 | 33 | 88 | 187 | 12 |
| 5636-01000 | 1000 | 33 | 103 | 228 | 6 |
| For screw caps, see Closures Stock Number 5636-33430 | |||||
5636-Media Storage Bottle
•Pyrex® glass, to prevent cracking during freezing and rapid thawing
•Supplied with a 38mm deep skirt, nontoxic rubber lined screw cap
| Stock No. | Size (ml) | Cap Size (mm) | O.D. (mm) | Height (mm) | Case Qty. |
| 5636-38125 | 125 | 38 | 57 | 130 | 12 |
| 5636-38250 | 250 | 38 | 69 | 145 | 12 |
| 5636-38500 | 500 | 38 | 85 | 180 | 12 |
| 5636-38100 | 900 | 38 | 108 | 215 | 6 |
| For additional screw caps, see Closures Stock Number 2029-00038 | |||||
5637-Media Storage Bottle
•Borosilicate glass
•Large neck opening with 45mm linerless polypropylene screw caps (32 mm on 50ml bottle)
•Linerless cap provides for a flexible secure seal, eliminating the problems of liners being
drawn into bottle during autoclaving
•Polypropylene pouring ring allows drip free pouring and protects rim against chipping
•High temperature caps and rings are available • Optional 45mm cap accessories
available
| Stock No. | Size (ml) | Scale (ml) | Cap Size (mm) | O.D.(mm) | Height(mm) | Case Qty. |
| 5637-00050 | 50 | 40 | 32 | 46 | 88 | 10 |
| 5637-00100 | 100 | 80 | 45 | 56 | 100 | 10 |
| 5637-00250 | 250 | 200 | 45 | 70 | 138 | 10 |
| 5637-00500 | 500 | 400 | 45 | 85 | 176 | 10 |
| 5637-01000 | 1000 | 900 | 45 | 101 | 225 | 10 |
| 5637-02000 | 2000 | 1800 | 45 | 136 | 260 | 10 |
| 5637-05000 | 5000 | 4500 | 45 | 181 | 335 | 1 |
| 5637-10000 | 10000 | 9000 | 45 | 236 | 405 | 1 |
| For additional screw caps and pouring ring, see Closure Stock Number 5637- | ||||||
5639-Plastic Coated Media Storage Bottle •Same features as our 5637 media bottle, but with the addition of a plastic coating
•Eliminates glass shards and aids in material containment if bottle
is broken •Optional 45mm cap accessories available
| Stock No. | Size (ml) | Scale (ml) | Cap Size (mm) | O.D. (mm) | Height (mm) | Case Qty. |
| 5639-00100 | 100 | 80 | 45 | 58 | 100 | 10 |
| 5639-00250 | 250 | 200 | 45 | 72 | 138 | 10 |
| 5639-00500 | 500 | 400 | 45 | 88 | 176 | 10 |
| 5639-01000 | 1000 | 900 | 45 | 103 | 225 | 10 |
| 5639-02000 | 2000 | 1800 | 45 | 140 | 260 | 10 |
| 5639-05000 | 5000 | 4500 | 45 | 182 | 330 | 1 |
| 5639-10000 | 10000 | 9000 | 45 | 236 | 405 | 1 |
| For additional screw caps and pouring ring, see Closure Stock Number 5637- | ||||||
•Designed for 5637 and 5639 Media Storage Bottles
•Welded, 316L stainless steel construction, ¼ inch O.D. tubing
•Two port model features siphon and vent tubes
•Three port model features siphon, fill and vent tubes
•Includes 45mm polypropylene screw cap and silicone gasket
| Stock No. | Description | Bottle Size (L) | Case Qty. |
| 5637-20001 | 2 Port | 1 | 1 |
| 5637-20002 | 2 Port | 2 | 1 |
| 5637-20005 | 2 Port | 5 | 1 |
| 5637-20010 | 2 Port | 10 | 1 |
| 5637-30001 | 3 Port | 1 | 1 |
| 5637-30002 | 3 Port | 2 | 1 |
| 5637-30005 | 3 Port | 5 | 1 |
| 5637-30010 | 3 Port | 10 | 1 |
5630-Roux
Culture Bottle
•Holds approximately one half total volume on flat surface bottom when placed in horizontal position
•Dam in neck prevents culture from entering neck
•For large area monolayer cell culture growth
•DeLong® style neck designed for use with 38mm stainless steel closure
| Stock No. | Capacity (ml) | Dimensions W x D x H (mm) | Case Qty. |
| 5630-01000 | 800 | 124 x 56 x 290 | 6 |
5632-Roux Culture Bottle
•Holds approximately one half total volume on flat surface bottom when placed in horizontal position
•Dam in neck prevents culture from entering neck
•For large area monolayer cell culture growth
•38mm deep-skirt, nontoxic, rubber lined screw cap
| Stock No. | Capacity (ml) | Dimensions W x D x H (mm) | Case Qty. | |
| 5632-01000 | 800 | 124 x 56 x 290 | 6 | |
| For additional closures, order Stock Number 2005-00038, 2006-00038 for 5630 bottle and 2029-00038 for 5632 bottle | ||||
•Provides strict anoxic conditions
•Heavy wall design allows for safe autoclaving
•Working capacity is approximately 80ml
•Bottle includes screw cap and impermeable butyl rubber septum type
stopper
| Stock No. | Description | Size (mm) | Case Qty. |
| 2535-50020 | Bottle Complete | 55 x 135 | 1 |
| 2535-00025 | Screw Cap Only | 25 | 1 |
| 2048-11800 | Rubber Stopper | 20 | 100 |
5642-Touch-O-Matic ® Bunsen Burner
•Touch ON-OFF platform with hand or finger to obtain full, regulated flame
•Remove hand and only the low burning pilot remains
•Platform also serves as a comfortable, work height hand rest
Automatic Foot Pedal Accessory
•Optional Foot Pedal for hands free operation
•Easy to install
| Stock No. | Description | Case Qty. | ||
| 5642-11111 | Burner Only | 1 | ||
| 5642-11122 | Foot Pedal Only / 115 Volt | 1 | ||
| 5642-22220 | Foot Pedal Only / 230 Volt | 1 | ||
| Standard unit uses mixed gas nozzle.
Butane Gas, Propane Gas, Natural Gas and Manufactured Gas nozzles are available upon request and are sold separately. |
||||
1943-Chemotaxis Chamber
The Chemotaxis Chamber is used for the measurement of chemotaxis of
polymorphonuclear leukocytes using small volumes of blood. It is similar
to the Sykes-Moore Chamber, but uses two gaskets instead of one, forming
two chambers separated by a 25mm diameter, 3 micron membrane filter (not
included). Each chamber will hold approximately 0.5 milliliters. Inoculation
vents are located on both the top and bottom sections. The required wrench
assembly is sold separately.
| Stock No. | Case Qty. | |||
| 1943-66666 | 1 | |||
| 1943-22115 | 6 | |||
| 1943-22222 | 1(oz) | |||
| 1943-44444 | 1 | |||
| 1943-55555 | 1 | |||
| For complete line of Coverslips, see Stock Numbers 1916 and 1943 | ||||
| # 2 Thickness Coverslips available upon request | ||||
| Reference: Baum, J., Mowat, A. G., and J. Kirk. 1971.
A Simplified Method for Measurement of Chemotaxis of Polymorphonuclear Leukocytes from Human Blood. Amer. Journal. Lab. Clin. Med. 77(3):501-509. |
||||
| Boyden, S.V. 1962.
The Chemotactic Effect of Mixtures of Antibody and Antigen on PolymorphonuclearLeukocytes. Journal. Expt. Med. 115:453. |
||||
7741-Controlled Atmosphere Chamber, Plexiglas®
•Grow cultures in any atmospheric gas mixture
•Chamber features removable door, inlet hose connector and pressure relief valve
•Includes stainless steel shelves
•Fits on Bellco Rockers and Shakers
•Easily humidified
•7741-10010 chamber includes stopcock for control of gas flow
•Non-autoclaveable
| Stock No. | Dimensions W x D x H (cm) | # Shelves | Case Qty. |
| 7741-10005 | 31 x 25 x 14 | 3 | 1 |
| 7741-10010 | 33 x 26 x 26 | 4 | 1 |
7741-Controlled Atmosphere Chamber, Stainless Steel
•Made from 304 Stainless Steel for autoclavability
•Grow cultures in any atmospheric gas mixture
•Chamber features inlet hose connector, stopcock for control of gas flow and pressure relief valve
•Includes stainless steel shelves
•Fits on Bellco Rockers and Shakers
•Easily humidified
| Stock No. | Dimensions W x D x H (cm) | # Shelves | Case Qty |
| 7741-30410 | 31 x 25 x 27 | 4 | 1 |
| For Rocker and Shakers, see Stock Numbers 7739, 7740 and 7744 | |||
7741-Hemolytic Plaque Assay Chamber
•Holds 10 Hemolytic Plaque Assay Racks
•Manufactured from Plexiglas®
•Watertight base for humidification
| Stock No. | Dimensions W x D x H (cm) | Case Qty. |
| 7741-04005 | 27 x 11 x 19 | 1 |
7741-Hemolytic Plaque Assay Rack
•Minimize Complement and reagent usage
•Plexiglas ® rack holds eight standard microscope slides
| Stock No. | Dimensions W x D (cm) | Case Qty. | ||
| 7741-04000 | 26 x 9 | 4 | ||
| Reference: Jeme, N.K., Nordin, A.A. and C. Henry.
1963.
"The Agar Plaque Technique for Recognizing Antibody Producing |
||||
| Cells in Cell Bound Antibodies".
Edited by B. Amos and H. Koprowski, The Wistar Institute Press. |
||||
| Mishell, R.I. and Dutton, R. W. 1967.
Immunization of Dissociated Spleen Cell Cultures from Normal Mice. Journal of Experimental Medicine 126:432. |
||||
1943-Sykes-Moore Culture Chamber
The Sykes-Moore Culture Chamber permits the study of cells by means
of high magnification, phase optics, or time lapse techniques. Use the
chamber with stationary culture when medium is changed intermittently by
use of a syringe. Cover slips are separated and an internal seal is maintained
by a nontoxic, silicone gasket preventing contact between culture and metal.
The gasket is penetrated by a needle to gain entrance to the culture area.
Four holes are provided equidistantly around the chambers for introduction
of samples. The chamber provides a 2.83 cm2 viewing area and
holds approximately 0.65 to 0.75 milliliters, depending on gasket size..
A wrench assembly is required and is listed separately below.
| Stock No. | Description | Case Qty. | ||
| 1943-11111 | Chamber Only | 1 | ||
| 1943-22222 | 25 mm Cover Slip # 1 Thick | 1(oz.) | ||
| 1943-20002 | 25 mm Cover Slip # 2 Thick | 1(oz.) | ||
| 1943-33315 | Silicone Gasket for 1.5 mm working distance | 6 | ||
| 1943-33325 | Silicone Gasket for 2.5 mm working distance | 6 | ||
| 1943-44444 | Wrench Assembly | 1 | ||
| 1943-55555 | Stage Holder for Microscope | 1 | ||
| References: Sykes, J.A. and E.B. Moore. 1959.
A New Chamber for Tissue Culture. Proc. Soc. for Exp. Biol. and Med.100:121-127 |
||||
| Sykes, J.A. and E.B.Moore. 1960.
A Simple Tissue Culture Chamber. Texas Report on Biol. and Med. 18(2):288-297 |
||||
TWC Biosearch International Home Page