Incubators
Quality, function and dependability are inherent in the complete line
of Bellco Incubators. All are designed to maximize chamber volume while
precise controls allow the creation of optimal environments for cell culture
growth. A wide range of models are available.
7727- Stacking Rack for CO2 Water Jacketed Incubator
•Made from steel, enabling placement of Bellco Water Jacketed CO2 Incubators atop one another
•Distributes weight on outer wall of incubator leaving top of lower
incubator free for maintenance, cleaning, etc.
| Stock No. | Dimensions W x D x H (cm) | Case Qty. |
| 7727-40002* | 60 x 52 x 26 | 1 |
| *Stacking Rack is for 7727-20002 and 7727-20222 only | ||
7725-Air Supply Pump
•Supplies filtered air to CO2 Incubators
•Small in size, the pump is placed conveniently in brackets on incubator
•Operates on 115 volt/ 60 Hz power supply
| Stock No. | Case Qty. |
| 7725-00120 | 1 |
7725-Fyrite® CO2 Indicator
•Easily and rapidly determines CO2 concentration within incubator or other similar closed atmosphere chamber from 0-20% CO2
•Fyrite's readings are unaffected by the presence of most background gases in the sample
•Furnished with with specially designed aspirator assembly and carrying
case
| Stock No. | Description | Case Qty. | |
| 7725-05000 | Fyrite CO2 Indicator | 1 | |
| 7725-05052 | Fyrite CO2 Repair Kit* | 1 | |
| 7725-05057 | Fyrite Indicator Replacement Fluid (2 oz.) | 1 | |
| * Fyrite Co2 Repair Kit includes gasket, diaphragm and fluid refill | |||
6727- Bellco2 Watch - Automatic CO2 Tank Switch
•Automatic switching system that constantly monitors the regulated CO2 supply into incubator
•Will automatically switch from primary tank to secondary tank when pressure drops below preset level
•Audible empty tank alarms
•Switches automatically from up to four primary tanks to four secondary tanks with the addition of Multiple Manifold
•Incorporates in-line replaceable gas filters that screen out oil and other contaminants
•Fail safe valves shut off CO2 supply during power failure to prevent toxic CO2 accumulation in the incubator
•Switch for silencing the alarm horn and bi-directional switching for
convenient tank replacement
| Stock No. | Power (V/Hz) | Description | Case Qty. |
| 6727-10002 | 115/60 | Bellco2 Watch | 1 |
| 6727-10222 | 230/50 | Bellco2 Watch | 1 |
| 6727-30003 | Replacement Gas Filter | 1 | |
| 6727-32001 | Quick Disconnect | 1 | |
| 6727-32008 | Multiple Manifold | 1 |
7728-Roll-In
Incubator
•"Flush-to-Floor" design accommodates 52 position, programmable Cell Production Roller Apparatus or 45 position standard Cell Production Roller Apparatus
•Optional adjustable shelves accommodate Bellco Magnetic Stirrers, Rockers and other, bench top equipment
•Forced air circulation facilitates even temperature distribution throughout the chamber
•Accessory outlets in chamber provide power for supplemental equipment
•Control panel features main power switch, convenience outlet power switch, safety thermostat, and microprocessor-based, digital temperature controller
•Temperature range: 9°C above ambient to 50°C (±2°C)
•Accepts optional Over-Temperature Alarm and Temperature Recorder Modules
•Left hand opening door (standard)
•Special models available with ports, solid door and right hand opening door
•Exterior Dimensions: 104 cm x 81 cm x 221 cm
•Chamber Dimensions: 89 cm x 66 cm x 193 cm
•Shipping Weight: Approx. 700 pounds
Mini Roll-In Incubator
•"Flush-to-Floor" design accommodates 20 positionCell Production Roller Apparatus
•Exterior Dimensions: 104 cm x 81 cm x 130 cm
•Chamber Dimensions: 89 cm x 66 cm x 102 cm
•Shipping Weight: Approx. 350 pounds
| Stock No. | Power (V/Hz) | Description | Case Qty. |
| 7728-09100 | 100/50 | Roll-In Incubator w/ Single Window Door | 1 |
| 7728-09005 | 115/60 | Roll-In Incubator w/ Single Window Door | 1 |
| 7728-95220 | 230/50 | Roll-In Incubator w/ Single Window Door | 1 |
| 7728-59005 | 115/60 | Roll-In Incubator w/ Double Window Door | 1 |
| 7728-59522 | 230/50 | Roll-In Incubator w/ Double Window Door | 1 |
| 7728-06005 | 115/60 | Mini Roll-In Incubator | 1 |
| 7728-65220 | 230/50 | Mini Roll-In Incubator | 1 |
7728-Roll-In Incubator Accessories
| Stock No. | Power (V/Hz) | Description | Case Qty. |
| 7728-31695 | 115/60 | Temperature Recorder | 1 |
| 7728-32695 | 230/50 | Temperature Recorder | 1 |
| 7728-30695 | Recorder Paper Replacement Roll (63 feet) | 1 | |
| 7728-70110 | 115/60 | Temperature Alarm Module | 1 |
| 7728-70220 | 230/50 | Temperature Alarm Module | 1 |
| 7728-40035 | Stainless Steel Shelf* | 1 | |
| 7728-40050 | Ultra Vented Heavy Duty Stainless Steel Shelf* | 1 | |
| *Stainless Steel Shelves fit Mini, Roll-In and Refrigerated Incubators | |||
7728-Refrigerated
Roll-In Incubator
•Designed for lower temperature cell incubations, such as insect
cell cultures
•Temperature Range: 20°C to 50°C (± 0.5°C cool) (±1.0°C heat)
•Features heating and refrigeration systems
•Microprocessor PID temperature controller with auto-tuning
•Will accept a 40 position Bellco Cell Production Roller Apparatus
•Accessory outlets in chamber provided to power supplemental equipment
•Forced air circulation facilitates even temperature distribution
throughout the chamber
•Control panel features main power switch, convenience outlet power
switch, safety thermostat, refrigeration power switch and
microprocessor temperature controller
•"Flush to Floor" design allows easy movement of Roller Apparatus
in and out of chamber
•Refrigerant: R134A, EPA approved, environmentally friendly non-CFC type
•Exterior Dimensions: 104 cm x 81 cm x 221 cm
•Chamber Dimensions: 89 cm x 66 cm x 178 cm
•Shipping Weight: Approx. 760 pounds
| Stock No. | Power (V / Hz) | Description | Case Qty. | ||
| 7728-01005 | 115 / 60 | Refrigerated Roll-In Incubator w/ Single Window Door* | 1 | ||
| 7728-51005 | 115 / 60 | Refrigerated Roll-In Incubator w/ Double Window Door* | 1 | ||
| *For optional Stainless Steel Shelves, see Stock Numbers 7728-40035 and 7728-40050 | |||||
7728- Mobile Roll-in Shelf Cart
•Designed for transporting glassware and equipment
•Accommodates two 36 liter and two 15 liter spinner flasks complete with overhead drives, or a variety of lab equipment
•Use as extra bench space in the lab
•Fits in to any Bellco full size Roll-in Incubator
•Mounted on four heavy duty, ball bearing swivel castors able to support approximately 750 pounds
•An optional integral power outlet strip is available for running 115 volt equipment
•Comes with two vented shelves for enhanced air flow
•Shelves are adjustable at 6 ¼ inch intervals
•Constructed of 1/8 inch thick aluminum
•Unit is shipped unassembled in a flat carton and is easily assembled with ordinary hand tools
•Additional shelves available
•Shipping Weight: Approx. 65 pounds
| Stock No. | Description | Dimensions (cm) W x D x H | Case Qty. |
| 7728-96000 | Mobile Roll-In Shelf Cart | 84 x 65 x 141 | 1 |
| 7728-96001 | Optional Power Strip | 1 |
7728-Bench
Top Incubator
•Temperature range: 5°C above ambient to 50°C (± 0.3°C)
•Instrument panel mounted on top for easy viewing and manipulation
•Accepts 10 position Bellco Roller Apparatus*, rockers, shakers, and stirrers
•Glass door permits viewing cultures without opening
•Interior accessory outlet provided
•Optional shelf can be adjusted on ½ inch centers
•Exterior Dimensions: 90 cm x 54 cm x 77 cm
•Chamber Dimensions: 75 cm x 36 cm x 51 cm
•Shipping Weight: Approx. 135 pounds
| Stock No. | Description | Case Qty. | ||
| 7728-02005 | Incubator with Solid Door | 1 | ||
| 7728-25220 | Incubator with Solid Door | 1 | ||
| 7728-50205 | Incubator with Glass Door | 1 | ||
| 7728-50522 | Incubator with Glass Door | 1 | ||
| 7728-00047 | Optional Shelf Only | 1 | ||
| *For Bench Top Roller Apparatus, see Stock Numbers 7620-02005 and 7620-02220 | ||||
7747-back-to-basics™ Water Bath
•Corrosion resistant Stainless Steel bath
•Hydraulic temperature sensor maintains temperature from ambient +5°C to 60°C
•Glass thermometer and mounting clip included
•Heat indicator light
•10.8L bath capacity
•Optional Stainles Steel gable cover extends temperature range to 90°C
| Stock No. | Description | Dimensions W x D x H (cm) | Tank Size (cm) | Case Qty. |
| 7747-90300 | 115 / 60 Volt/Hz | 33 x 47 x 22 | 28 x 31 x 16 | 1 |
| 7747-90322 | 230 / 50 Volt/Hz | 33 x 47 x 22 | 28 x 31 x 16 | 1 |
| 7747-93100 | Gable Cover | 11 (height) | ----- | 1 |
7748-Heating/Cooling Circulating Water Bath
•Designed for use with Bellco Water Jacketed Spinner Flasks or Bellco's Heating/Cooling Coils
•Cabinet is made from 304 Stainless Steel
•750 Watts Stainless Steel Heater hermetically sealed and electronically controlled
•Temperature Range: -15°C to +90°C (±0.1°C)
•Cooling capacity of 1050 BTU @ 20°C, 1/7th H.P.
•external pumping capacity: 11 liters per minute through 3/8" O.D. Stainless Steel tubing
•All exposed pump parts are 304 Stainless Steel
•High temperature-low water safety control automatically shuts heater off when temperature exceeds preset value of 90°C
•Includes male quick disconnects for connecting to external devices
| Stock No. | Power Volts/Hz | Dimensions W x D x H (cm) | Case Qty. | ||
| 7748-10110 | 115 / 60 | 28 x 35 x 34 | 1 | ||
| 7748-10220 | 230 / 50 | 28 x 35 x 34 | 1 | ||
| For Water Jacketed Spinners, see stock no. 1965 | |||||
| For Heating/Cooling Coils see stock no. 1964 | |||||
TWC Biosearch International Home Page